Reversing Cameras and Parking Aids
Reversing cameras and parking sensors are an invaluable upgrade to your car.
These aids not only help you navigate in tight corners and negotiate blind spots, but they are also save you money by preventing a scratch or bump. Why would you consider parking sensors or a reversing camera? Dents to your bumpers or under body panels can happen all too easily when parking in unfamiliar or confined spaces.
Front and rear parking sensors, can help to determine how close you are to an unseen object. Vehicle sensors or reversing cameras, not only make parking less stressful and safer; they could pay for themselves in a short time.
The excess on your vehicle insurance usually means you'll end up paying the full cost of any relatively minor damage, or it could mean the loss of no claims bonus! Few of us might admit that we are not the best drivers when it comes to parking in very tight spaces. A set front and rear sensors or a parking camera will help correct bad technique and make your driving experience safer.
Reversing Camera for my Fiat 500 Lounge, with a 7" UConnect screen.
Location of installation: Essex
Perfect integration of a reversing camera system, made for the new Fiat 500 Lounge with the Uconnect screen.
Our integartionbox also allows for a front facing camera to be installed from the same box.
As you can see from the picture the HD wide angle camera captures the bumper, as the perfect reference point.
Reversing Camera for Maserai Ghibli and Levente.
Location of installation: Canterbury.
Our engineers have a reversing camera solution for the Maserati range of vehicles. Seamless integration into the, 8.4" UCONNECT touch screen with fixed gridlines and HD wide angle camera view.
The integration box also allows for a front facing camera or simply addon a Digital TV system.
Reversing Camera for my Porsche Boxster.
Installation location: London
The system is fully integrated into the PCM screen, offers dynamic gridlines and retains the OPS. optical parking system.
We offer reversing camera and parking sensors solutions, for the entire range of Porsche vehicles.
Reversing Camera for my Audi Q5.
Fitting address: Cumbria
Our integration kit offers full retro fit features and seamlessly blends into the Audi MMI screen.
Features include dynamic gridlines and retention of factory fitted parking sensors.
We have a reversing camera solution for the entire range of Audi vehicles.
Reversing Camera for my BMW Mini.
Installation address: Preston
The BMW mini has a very compact and complicated dashboard.
The screen however is based on the BMW i-Drive system.
Our camera interface works effortlessly with the i-Drive dial and offers a full landscape picture and/or a slit screen for viewing both picture and sensor image.
We stock the entire range of reversing camera solutions for the BMW vehicles.
Reversing Camera for my Lexus RC300H
The Lexus range of vehicle offers many high tech features, are legendry for their built quality and longevity.
The new Lexus RC300H lives up to that reputation but does not come with a parking camera.
Our camera integration kit works perfectly with the Lexus system and offers advanced features such as moving guidelines and retention of the parking audio beeps.
We stock the entire range of reversing camera solutions made for the Lexus range of cars.
Reversing Camera for my Peugeot 2008
Installation Location: Birmingham
The Peugeot 2008 is a very popular SUV vehicle and offers a range of advanced features.
Our client wanted a reversing camera for their Peugeot 2008 because the factory parking sensors, could not detect small objects, when engaged in reverse.
This is a common problem, with all OEM fitted parking sensors. Our solution was a retro fit reversing camera made specifically for the Peugeot range of cars.
This kit produces fixed gridlines and retains the audio beeps.
Reversing Camera for My BMW 5-series.
Our install in the new 2017 plate BMW 5-series shows the advanced features offered by these multimedia integration kits.
Retention of OPS, optical parking system and active dynamic gridlines.
These are plug and play kits, so there is no cutting of factory wires.
Reversing Camera for my Mercedes CLS
Mercedes offer many high spec. vehicles and probably have one of the largest ranges, to choose from.
As with most manufacturers, they don’t all come with reversing cameras or parking sensors.
CVA Supplies offer a reversing camera solution, for the entire range of Mercedes vehicles.
Our integration kits offer dynamic gridlines and retention of the OPS. Optical Park Assist.
Parking Camera for my Maserati Ghibli.
Installation location: South Wales
Our client needed a reversing camera for their new Vehicle, the Maserati Ghibli. They were told by the dealership that the installation of a reversing camera would cost in excess of £1200. Not happy with that quote, our client found fit4caraudio, through a Google search.
We quoted £795.00 fitted, with a 2 year warranty and we would travel to South Wales to carry out the install. The OEM look is in keeping with the vehicle and the HD wide angle camera, address the blind spots, our client was experiencing before the install.
BMW M3 parking camera installation.
Location on installation: North Wales.
Here is an example of a reversing camera integration into a BMW M3. The vehicle has an 8.8” high definition screen coupled with NBT evo software.
With our high spec. multimedia interface, we can offer dynamic gridlines and OPC (optical parking control) retention.
Parking Camera for my Range Rover Evoque.
The Range Rover Evoque has a fantastic reputation for offering value for money, a great array of features and classic Jaguar design. The problem with it’s classic design is that the vehicle has a several blind spots! Our reversing camera solution will help eliminate this problem, giving the driver a clear and sharp view of what is beside them when engaged in reverse.
Our Range Rover Evoque reversing camera kit will integrate into the OEM screen and offer dynamic gridlines and retention of the parking sensor system.
Parking Camera installed into a 2017 Citroen C3
The Citroen C3 Aircross has a very sophisticated touch screen with built-in Navigation and DAB radio.
Our engineers carried out a complicated reversing camera installation that required the image to integrate into the factory screen. Consideration of the factory parking sensors and retention was also a factor.
The Citroen C3 reversing camera integration box allows for dynamic gridlines and OPS retention.
Rear view parking camera for my BMW i3 2016 plate.
The BMW i3 represents the vehicle of the future! However, even this high spec car has blind spots and can be difficult to manoeuvre in tight spaces.
The answer is of course a retrofit BMW i3 reversing camera kit. As seen in our image, the integration kit blends seamlessly into the i-drive screen and generates dynamic gridlines. In our case the vehicle did not have the OPS, optical parking system. Our BMW i3 parking camera install, also includes a HD wide angle camera.
Location of installation: North West.
Parking Camera for my Volvo XC60. None sensus system.
The Volvo XC60 has a wide body that results in several blind spots and that can make manoeuvring in tight spaces difficult.
This particular vehicle has the none Sensus system, so integrating a reversing camera into the factory screen is a complicated install. Our kit includes a high definition wide angle camera giving a true 170 degree viewing angle.
As our picture demonstrates, the display is crisp and sharp from edge to edge, coupled with dynamic gridlines and retention of the factory parking sensors.
Location of installation: Merseyside.
Front facing Camera for 2018 Audi Q3
In this example of a camera integration, we want to show you that you can have a reversing camera and a front camera system all linked to the factory screen and still have retenion of the parking sensor system.
This particular camera is designed for the Audi range of cars and is embedded in the Audi badge.
We return to the VW Transporter, in Viper Green. This time to carry out a 4-eye reversing sensor install.
The Transporter has a low bumper, so we had to use angled sensors, so that the ground was not picked up.
Colour coded and lacquered to suit the vehicle, the Steelmate sensors looked great!
The installation for this parking aid was carried out in Manchester.
Our client had recently scraped their bumper, of their much beloved Ford Mondeo. Insurance cost put the repair bill at our £400.00 for a direct replacement.
Opting to leave the scratch as it is and deciding to have some form of deterrent fitted instead: fit4caraudio installers recommended a 4-eye rear parking system with an on-board dash display. Not only do you get and audio beep but you also get a digital readout, with converging LED lights.
It’s about a 3 hour labour install with some great results.
This parking aid install was carried out in the Merseyside district.
Posted on 14 February 2014.
Here we have a universal parking aid solution! A clip-on rear view mirror monitor and a reversing camera.
Designed to fit any vehicle; it is both practical and cost effective. Our client was delighted by the quality of the picture and ease of use.
Simple select reverse gear and the mnitor become a rear view screen.
This parking aid installation was carried out in the Burton on Trent area.